How to Measure Your Kada Size Accurately

Method 1: Using an Existing Kada and a Ruler (Strongly Reccomended)

If you already have a kada that fits well, you can use this method to determine your size.

Steps:

1. Take a steel/plastic ruler/scale

2. Place the kada on a flat surface.

3. Measure the inner diameter of the kada (not the outer edge) from one side to the other starting from 0cm / 0mm

4. Note the measurement in centimeters (cm) or millimeters (mm) only

📌 Tip: The most common kada sizes range between 6.5cm (65mm) to 7.5cm (75mm) in diameter.

🔍 Example from the Image: In the reference image, the ruler measures the inner diameter of the kada, which is approximately 7cm  (70mm).

This is the most accurate way to determine your kada size. Other methods may provide inaccurate measurements, but this method is 100% precise, and we strongly recommend using it.

If you don’t have a kada, you can check your size by visiting a nearby jewelry store or borrowing one from friends or family.

Method 2 : Measuring Kada Size Without Kada Using Your Hand Measurements

This method can you your size measurements but this

Steps:

1. Mark at the centre of Index finger (first finger) and at the centre of little finger (smallest finger) with pen as shown on image below
   
   
   

2. With measuring scale measure the distance between marked points.
   This distance between marked points is your kada size.
   
   
   
   
   
   📌 Tip: The most common kada sizes range between 6.5cm (65mm) to 7.5cm (75mm) in diameter.